From bbcab7eb71f0a838a31d933bc9814a2712c4eb73 Mon Sep 17 00:00:00 2001
From: lukas-heilgenbrunner <lukas.heiligenbrunner@gmail.com>
Date: Tue, 26 Sep 2023 19:03:42 +0200
Subject: [PATCH] add heatbed mount

---
 heated-bed-corner-mounts.scad | 148 ++++++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 heated-bed-corner-mounts.scad

diff --git a/heated-bed-corner-mounts.scad b/heated-bed-corner-mounts.scad
new file mode 100644
index 0000000..a3a7376
--- /dev/null
+++ b/heated-bed-corner-mounts.scad
@@ -0,0 +1,148 @@
+use <helpers/Holes.scad>
+
+// 
+// TOP PART
+//
+module top_part(){
+	translate([0, 0, 0]){
+
+		// Main object
+		difference() {
+			cube([20, 20, 7.7]); // Base
+			translate([-1, -1, 6]) cube([16, 16, 2]); // Bed cut
+			translate([-1, -1, 3.2]) cube([11, 11, 2.9]); // Glassplate cut
+			translate([12.3, 12.3, -1]) cylinder(h = 22, d=3.5, $fn=30); // Screw hole
+			translate([-25, 5, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]); // Mask cutoff front
+			translate([10, 25, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]); // Mask cutoff back
+		}
+
+		// First arm
+		translate([10, -30, 0]) cube([3, 30, 3]);
+		difference(){
+			translate([9, -30, 0]) resize([0, 10, 0]) cylinder(h=6, d=8, $fn=50);
+			translate([1, -45, -1]) rotate(a=-40, v=z) cube([3, 30, 8]);
+		}
+
+		// Second arm
+		translate([-30, 10, 0]) cube([30, 3, 3]);
+		difference(){
+			translate([-30, 9, 0]) resize([10, 0, 0]) cylinder(h=6, d=8, $fn=50);
+			translate([-45, 5, -1]) rotate(a=-50, v=z) cube([3, 30, 8]);
+		}
+
+		//Hinges
+		translate([16.5, 3, 7.7]) cube([2, 3, 3]);
+		translate([3, 16.5, 7.7]) cube([3, 2, 3]);
+	}
+}
+
+
+//
+// BOTTOM PART
+//
+module bottom_part(){
+	translate([0, 0, 7.7]){
+		difference() {
+			cube([20, 20, 10]); // Base
+			translate([12.3, 12.3, -1]) cylinder(h = 22, d=3.5, $fn=30); // Screw cut
+			translate([12.3, 12.3, 2]) cylinder(h = 10, d=9, $fn=50); // Spring cut
+			translate([-25, 5, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]);
+			translate([10, 25, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]);
+
+			//Hinges
+			translate([16.25, 2.75, -1]) cube([2.5, 3.5, 7]);
+			translate([2.75, 16.25, -1]) cube([3.5, 2.5, 7]);
+		}
+	}
+}
+
+
+
+//
+// NUT PART
+//
+module nut_part(){
+	translate([0, 0, -15]){
+		difference() {
+			cube([20, 20, 10]); // Base
+			translate([12.3, 12.3, -1]) cylinder(h = 22, d=3.5, $fn=30); // Screw cut
+			translate([12.3, 12.3, 4]) cylinder(h = 10, d=10.2, $fn=50); // Circle end
+			translate([-5.2, 2, 4]) rotate(a=-45, v=z) cube([10.2, 20, 10]); // Box cut
+			translate([12.3, 12.3, -1]) cylinder(h = 3, d=7, $fn=6); // Nut hole
+			translate([-25, 5, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]);
+			translate([10, 25, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]);
+		}
+	}
+}
+
+
+//
+// 	CROOKED NUT PART
+//	I had to make this bottom part because one of the screw holes in my aluminum plate
+//	had been milled crooked.
+//
+module crooked_nut_part(){
+	translate([0, 0, -15]){
+		difference() {
+			cube([20, 20, 10]); // Base
+			translate([13, 12, -1]) cylinder(h = 22, d=3.5, $fn=30); // Screw cut
+			translate([12.3, 12.3, 4]) cylinder(h = 10, d=10.2, $fn=50); // Circle end
+			translate([-5.2, 2, 4]) rotate(a=-45, v=z) cube([10.2, 20, 10]); // Box cut
+			translate([13, 12, -1]) cylinder(h = 3, d=7.3, $fn=6); // Nut hole
+			translate([-25, 5, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]);
+			translate([10, 25, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]);
+		}
+	}
+}
+
+// custom nut part
+module custom_nut_part(){
+    $fn=100;
+	translate([0, 0, -15]){
+		difference() {
+            union() {
+                translate([-10, -10, -10]) cube([30, 30, 20]); // Base
+                
+            }
+			
+			#translate([12.3, 12.3, -1]) cylinder(h = 22, d=3.5, $fn=30); // Screw cut
+			//translate([12.3, 12.3, 4]) cylinder(h = 10, d=10.2, $fn=50); // Circle end
+			//translate([-5.2, 2, 4]) rotate(a=-45, v=z) cube([10.2, 20, 10]); // Box cut
+			#translate([12.3, 12.3, -1]) rotate([0,-90,0]) M3Nut(3); // Nut hole
+			//translate([-25, 5, -1]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 22]);
+			translate([10, 25, -15]) rotate(a=-45, v=[0, 0, 1]) cube([40, 20, 42]);
+            translate([-8, 20, -10]) rotate(a=-45, v=[0, 0, 1]) cube([45, 20, 10]);
+            
+            #translate([10,5,5]) rotate([0, -90, 0]) cylinder(h=21, d=5);
+            donut_radius=10;
+            d=5.2;
+            #translate([-5, -5 ,-5]) {
+                rotate_extrude(angle=90) translate([donut_radius,0,0]) circle(d=d);
+                translate([0, 10, 0]) rotate([0, -90, 0]) cylinder(d=d, h=5);
+                translate([10, -5, 0]) rotate([-90, 0, 0]) cylinder(d=d, h=5);
+            }
+            
+            
+            #translate([10, -5, -10]) cylinder(h = 22, d=3.5, $fn=30); // Screw cut
+            translate([10, -5, 7]) rotate([0,-90,0]) M3Nut(3); // Nut hole
+            translate([10, -5, -13]) rotate([0,-90, 0]) M3Head(5); // Spring cut
+            
+            #translate([-5,10, -10]) cylinder(h = 22, d=3.5, $fn=30); // Screw cut
+            translate([-5,10,  7]) rotate([0,-90,0]) M3Nut(3); // Nut hole
+            #translate([-5, 10, -13]) rotate([0,-90, 0]) M3Head(5); // Spring cut
+            
+            #translate([-5,-5, -10]) cylinder(h = 22, d=3.5, $fn=30); // Screw cut
+            translate([-5,-5, 7]) rotate([0,-90,0]) M3Nut(3); // Nut hole
+            translate([-5,-5,-13]) rotate([0,-90, 0]) M3Head(5); // Spring cut
+		}
+	}
+}
+
+
+//top_part();
+//bottom_part();
+custom_nut_part();
+//crooked_nut_part();
+
+
+